Skip to content
Licensed & insured Family owned & operated · Lakeville, MA
No heat? Tap to call508-521-9477
Oil boiler tune-up: combustion analyzer connected to a New Yorker oil boiler with a Beckett burner
Licensed & insured · Lakeville, MA

HVAC Maintenance & Tune-Ups for SouthCoast Homes

Seasonal tune-ups and maintenance and service plans keep furnaces, boilers, heat pumps and AC running and catch small problems before the first freeze.

  • Same-day repair
  • Free estimates on new systems
  • Financing through Wisetack
  • Warranty on our labor
Chat with ArmusOnline 24/7 · tap a topic to start

Due for a tune-up? Tell me which systems you have.

At a glance

Service area
New Bedford, Lakeville and the rest of the SouthCoast, plus the South Shore, Cape Cod and Rhode Island
Based in
Lakeville, MA. We come to your home or business.
Phone
508-521-9477, answered 24/7
Specialties
Tune-ups and maintenance for furnaces, boilers, oil burners, central AC, heat pumps, mini splits and water heaters
Pricing
Repairs start with a paid diagnostic visit. Replacements get a free written estimate.
Maintenance options

Ask about yearly maintenance

Tell us which systems you have. The office replies with the maintenance options for your equipment and answers your questions.

Learn About Our Maintenance Options or call 508-521-9477, answered 24/7 This is an information request. It does not purchase or enroll you in a plan.

Which tune-up fits your system?

Each system has its own season and its own checklist.

What a tune-up covers

Heating tune-up

Burners, ignitor and flame sensor cleaned, heat exchanger and safeties checked, combustion and venting tested.

Cooling tune-up

Coil and condenser cleaned, refrigerant and electrical checked, condensate line cleared.

Mini split deep clean

Heads, blower wheels and coils cleaned so they run quiet, efficient and odor-free.

Thermostats & controls

Thermostats, zone controls and settings checked and updated.

When to book a tune-up

  • More than a year since the last tune-up
  • Before the first cold snap or heat wave
  • Higher bills with no change in use
  • New noises or smells at startup
  • Uneven temperatures room to room
  • A warranty that requires yearly service

Tune-up or maintenance plan?

One-time tune-up

  • A single visit before the season
  • Good for newer systems in good shape
  • Book any time

Maintenance plan

  • Seasonal visits scheduled for you
  • Every system in the house on one plan
  • Plan terms written on your agreement

Ask about yearly maintenance options.

Job photos

Maintenance: job photos

Real jobs, photographed by the technician who did the work.

Mini split cleaning, after: the same blower wheel clean and clear
Mini split cleaning, before: blower wheel with black buildup inside an indoor unit
Before After
Mini split cleaning: the same blower wheel after a deep clean
Mini split cleaning, after: Mitsubishi indoor unit closed back up after a deep clean
Mini split cleaning, before: Mitsubishi indoor unit with the coil open and a plastic wash bag hung under it
Before After
Mini split deep clean, October 2026: Mitsubishi indoor unit closed back up
Heating tune-up: technician measuring combustion with a Testo analyzer probe at a black cast-iron heater
Heating tune-up: combustion test with a Testo analyzer
AC maintenance: spraying coil cleaner on an outdoor condenser coil with a hose-end sprayer
AC maintenance: cleaning an outdoor condenser coil
Mini split cleaning: indoor unit opened up with the coil exposed for a deep clean
Mini split cleaning: indoor unit opened for a deep clean
Mini split maintenance: clamp meter testing the electrical current at a Daikin outdoor unit
Mini split maintenance: electrical test at an outdoor unit
Refrigerant leak check: soap bubbles forming on a copper line set fitting
AC repair: refrigerant leak check with soap bubbles

Why does maintenance matter more near the coast?

Equipment on the SouthCoast ages faster than the brochure suggests, for reasons that are local.

Salt air

Condensers and heat pumps near Buzzards Bay and Mount Hope Bay sit in salt air that corrodes coil fins, rusts fan motors and cabinets, and pits electrical contacts. A yearly coil rinse and a look at the fins and contacts help a condenser reach its expected life.

Pollen and tree dust

Every spring, oak and pine pollen coats outdoor coils. The layer traps heat and makes the compressor work harder, and it is easy to rinse off in May.

Oil heat

Many homes in Lakeville, Middleborough, Carver, Plymouth, Rochester and Freetown still heat with oil. An oil burner depends on a clean nozzle and filter, and skipping the yearly service is a common reason for a lockout.

Older houses and long seasons

Older houses in New Bedford and Fall River ask a lot of their boilers: a long heating season and decades-old piping. A tune-up catches a waterlogged expansion tank or a sticking zone valve while the fix is still small.

Humid summers

Humid weather grows algae in condensate drains and biofilm on coils and blower wheels. A spring drain flush and coil cleaning prevents many August leak and odor calls.

What can a tune-up fix, and what can it not?

A tune-up keeps a sound system efficient and safe and catches wear parts before they fail. It does not repair a cracked heat exchanger, a leaking evaporator coil, a failing compressor or a cracked boiler section.

When we find one of those, we stop and explain what we found. You get the repair or the replacement price in writing, and you approve every step. Keep your service invoices, because some equipment makers ask for proof of yearly service when you make a claim.

What does a tune-up cost, and what do I get?

Tune-up price. The office gives you the visit price when you call or book, and you approve it before we start. The technician explains what was cleaned, what was measured and what was found.

Estimate. If a tune-up shows the system is near the end of its life, we give you a free written estimate for a replacement. The repair price and the replacement price come side by side.

What to have ready.

  • The systems you have: furnace, boiler, AC, heat pump, mini split, water heater
  • Their ages, if you know them
  • A clear path to each unit, including the outdoor units
  • Any noise, smell or error code you have noticed

Book online. Send the form or call; we confirm your visit by text.

Rebates & financing

Mass Save Heat Pump Installer Network participating contractor.

Rebates and the 0% HEAT Loan available.

Financing through Wisetack

Financing for new systems runs through Wisetack via Housecall Pro, subject to credit approval. Estimates on new systems are free.

Recent maintenance jobs

From our completed jobs, most recent first. Customer names and street addresses are left out.

  • September 2026, Dartmouth. HVAC system: Diagnostic and cleaning visit.
  • June 2026, Fairhaven. Fujitsu mini split: Maintenance visit.
  • June 2026, Dartmouth. Two HVAC systems: Preventative maintenance on both systems.
  • May 2026, Raynham. Mini split: Deep clean.
  • February 2026, New Bedford. Oil boiler: Cleaning and tune-up.
  • November 2025, Lakeville. Boiler: Maintenance, and the flexible flue replaced with new hard pipe.

Where do you do tune-ups?

We work in Lakeville, New Bedford, Middleborough, Dartmouth, Fall River, Taunton, Wareham, Brockton, Fairhaven, and the rest of the SouthCoast, South Shore, Cape Cod and Rhode Island. See all service areas.

We do tune-ups in the towns below and also in Attleboro, Providence and northern Rhode Island.

Brands

Brands we install & service

  • Mitsubishi Electric
  • Fujitsu
  • Daikin
  • Carrier
  • Trane
  • Goodman
  • Lennox
  • Rheem
  • Lochinvar
  • Navien
  • Weil-McLain
  • Bradford White

Maintenance questions, answered

How often should my system be serviced?

Once a year for each system: heating before the cold, cooling before the heat. Heat pumps and mini splits that run year-round benefit from both.

What’s included in a maintenance plan?

Seasonal tune-ups for the systems on the plan, scheduled for you. The visits and terms are written on your plan agreement, so ask the office for the current options.

Do you service equipment you didn’t install?

Yes. We maintain and repair most makes of furnaces, boilers, AC, heat pumps and mini splits.

Does maintenance really save money?

A clean, adjusted system runs more efficiently and catches worn parts before they fail on the coldest night, when repairs cost the most.

When should I book each tune-up?

Book heating equipment in September or October, central AC in April or May, and mini splits in spring or fall. A home with pets may need a mini split cleaned more often, because pet hair and dander clog filters faster. A heat pump needs two visits a year, one before each season. If you missed the window, book anyway, because a late tune-up still beats none.

What can a tune-up not fix?

A tune-up keeps a sound system running well, but it does not repair a cracked heat exchanger, a leaking coil or a failing compressor. When we find one, we stop, explain it and price the repair or the replacement in writing.

Do you clean mini split blower wheels, or only the filters?

We clean the blower wheel, the indoor coil, the drain pan and the condensate line, not only the mesh filters. The blower wheel is where dust and biofilm collect, and that is why a mini split gets noisy, drips or smells musty.

How do I get on a yearly schedule?

Ask about yearly maintenance options for a visit we schedule for you. You can also book a single tune-up by phone or online.

How much does a furnace tune-up cost?

The price depends on the system, such as a gas furnace, an oil furnace with its burner or a boiler, and on what the visit includes. We give you the visit price when you call or tap Book ASAP, and you agree to it before we start. For a yearly visit that we schedule for you, ask about yearly maintenance options.

How much does an AC tune-up cost?

The price depends on the type of system and on what the visit includes. We give you the visit price when you call or tap Book ASAP, and you agree to it before we start. Our furnace and AC tune-up checklist shows what a cooling tune-up covers.

What is on a heating and AC maintenance checklist?

A furnace visit covers the filter, the burner or igniter, the flame sensor, the blower and the safety switches, plus a combustion test on oil. A boiler visit covers a flush and bleed as needed, the expansion tank, the relief valve and a combustion analysis. AC covers the coil, the drain, the capacitor and a refrigerant check, and a mini split gets its filters, blower wheel and drain cleaned. Our furnace and AC tune-up checklist has the full list.

What is included in a boiler service?

A boiler service includes a flush and bleed as needed, a check of the expansion tank and the relief valve, a combustion analysis, and checks of the controls and the circulators. An oil boiler also gets a new nozzle and filter and a cleaning. You get a plain explanation of what was checked and what was found.

How long does a furnace tune-up take?

A furnace tune-up is a single visit. The time varies with the type of furnace and with what the technician finds, and a clean, well-kept system is usually quicker than one that needs attention. The technician walks you through the results before leaving.

Due for a tune-up?

Book a tune-up in New Bedford & the SouthCoast

Call 508-521-9477, answered 24/7, or tap Book ASAP and the office confirms your visit by text.

Tap to call508-521-9477 Book ASAP
Book ASAP